WaterFurnace 5 Series Geothermal Heat Pump

The new 5 Series WaterFurnace Geothermal heat pump, the newest flagship product from WaterFurnace, will replace the Envision product line. This new product line is the next generation in geothermal from WaterFurnace. The 5 Series is an upgrade to the popular Envision® product line that delivers whole-home comfort at efficiencies that are among the world’s highest. This new technology is available now for homeowners to purchase.

The 5 Series 500A11 combines forced air heating and air conditioning and generates a portion of a home’s hot water, all from a single unit. Available in nine single-speed and six dual-capacity sizes from 1 to 6 tons, the geothermal heat pump system uses environmentally-friendly R-410A refrigerant and features a variety of advanced technology and components.

WaterFurnace NHW 502W12 Geothermal Boiler Replacement

Capable of 150°F water output, the 5 Series 502W12 makes upgrading to a WaterFurnace geothermal system easy, particularly where the replacement system must work with existing cast iron or baseboard radiators. In a building with a radiant floor heating system, the unit’s higher water temperature means the 502W12 can be installed between joists under the floor, removing the need to alter existing flooring.

The 502W12 uses two high-efficiency Copeland Scroll™ compressors for reliable, low-cost operation. Compressor blankets, double-isolation mounting plates and a discharge muffler ensure a quiet system. In addition, two brazed plate heat exchangers provide increased efficiency, performance and reliability. Smaller than traditional coaxial exchangers, they allow the 502W12 to provide high-capacity performance in a compact unit.

WaterFurnace 7 Series Variable Speed Geothermal System

The new 7 series is with its incredible efficiency and ground-breaking technology will bring new levels of comfort and savings to homeowners. The 700A11’s InfiniSpeed™ variable capacity technology works in unison with a variable speed loop pump and variable speed blower motor to provide a level of comfort you need to experience to believe. The unit also provides the industry’s widest capacity range – from as low as 20% to as high as 130% – to keep homeowners comfortable over the widest scope of conditions.

In addition to the industry’s highest efficiencies and comfort, the 700A11 was made with contractors in mind. A dedicated front-facing communication port provides a high degree of setup/service without ever needing to open the unit, while Comfort Talk and plain English status updates on the thermostat make the 7 Series easy to diagnose. It boasts a bi-directional electronic expansion valve for the most precise refrigerant control available while exclusive features like SuperBoost™, IntelliZone2 capability, and energy monitoring, place the 7 Series at the top of its class.

WaterFurnace Synergy3D WaterFurnace Geothermal Heat Pump

The WaterFurnace Synergy3D WaterFurnace geothermal heat pump drastically increases energy savings on heating and cooling costs, while also providing hot water for radiant floor heat.  The Synergy3D combines a boiler, a furnace and an air conditioner in one unit.  The Synergy3D is available in four vertical sizes with either top or rear discharge..  It contains heavy-gauge metal cabinets painted with a durable metallic finish for allure and protection. Copeland dual capacity scroll compressors produce reliability with excellent performance.  With quiet operation due to the ECM blowers, and a longer life and reliability due to the coated air coils, the Synergy 3D is a trustworthy product.  All of the Synergy3D units make use of the ozone-safe R-410A refrigerant.  The advanced microprocessor sequences all of the components during operation and creates an easier use for the customer with troubleshooting features including fault lights and on-board diagnostics. Heating priority may be given to forced air zones or radiant floor heat, to attain the ultimate feeling of comfort. 

No matter the area, large or small, the Synergy3D unit makes radiant heat possible and easy. The WaterFurnace Synergy3D system is created to combine the warmth of radiant heat, and the reliability of forced air, producing the ultimate comfort. 

.

WaterFurnace Legend Series Geothermal Heat Pump

The Legend Series offers extensive reliability as the technology used has developed through four generations of products. It represents the highest quality and efficiency of units available, and at an excellent price. This unit produces years of reliable energy, with huge savings and comfort.  Benefits that owners will receive include extensively lower energy savings and comfort with a smaller impact on the environment. 

WaterFurnace Envision Water to Water Geothermal Heat Pump

This NSW hydronic heat pump has an extensive range of operating temperatures, compact size, reversible control box, and piping, which enable the unit to operate in many applications.  These applications include pool/spa heating, radiant floor, snow melt, aquaculture, and process water installations.  These units can be used for heating only, cooling only, (field converted for chilled water applications), or heating/cooling.  By sampling the entering water temperature, the advanced microprocessor controls the pumps and the compressor.  The user is able to view all modes of operation and easily adjust temperatures with the controller.  The controller monitors all of the fault conditions to secure a safe and efficient operation.  With the heavy-gauge steel finished with a corrosion-resistant polyester coating, the NSW cabinet provides years of durability and elegance.  Features including scroll compressors, R-410A refrigerant, and oversized heat exchangers combine together to benefit the user with unheard of energy savings.